Where Do I Put the Jack Under My Car?
Buying a car jack is not as easy as you think because you need to make sure that it is of high quality and durable. It should also fit the vehicle that you are currently using. Once you’ve bought a car jack, the next thing that you need to think about is the proper way to use it.
Where do I put the jack under my car? This is the question that many newbies are asking right now. You cannot simply place the car jack anywhere because it might cause damage to your car or the car jack, or worse, it might hurt you during the process.
Let’s check out how to find the right location to put your car jack and also talk about some safety precautions to keep in mind when you are putting them under your car.
Where Do I Put the Jack Under My Car?
Using a car jack is not too complicated, but you need to know where to place them properly. Every vehicle, whether it is a car or a truck, has a jack point. As a matter of fact, most of them have multiple jack points along the body.
These jack points would be the place where you have to put the car jack. If you place them anywhere else, a lot of problems may occur. So how do you find the jack points of your car?
The only way to find the jack points of your car is to check the owner’s manual. For beginners, it is always advised to check the owner’s manual because it will be very difficult to check for jack points manually.
If you are unfortunate and you misplaced the owner’s manual of your car, there are several ways to check the jack points on your car manually. Here are some of them:
- Check behind the front and back wheels.
Almost all types of cars and trucks have a jack point behind their front and back wheels. They are usually positioned next to the rocker panels. These jack points are placed there to make it easier for the vehicle owner to change their flat tires.
- Check for central jack points found behind the front and rear bumpers.
- Check manually under the car.
To check for jack points in the middle of the car, you have to look for a flat metal area along the weld. You can also find a notch that would match the shape of your jack or a cutout in the plastic skirt that exposes the metal. You can also find some car or truck models where there is a “jack” label.
Safety Tips When Using a Car Jack
Even if you already know where to put the car jack, you still need to be very careful because the damage caused by an accident related to this is extremely severe. It may even lead to death, so you need to be very careful. Here are some safety tips to follow when you are using a car jack.
- Jacks Are Only Used to Lift a Vehicle
Always remember that car jacks are designed only to lift a vehicle and not to hold them in place. If you are going to use a car jack, make sure that you always have a jack stand in place to hold the car up after lifting it.
There are a lot of accidents related to this. Beginners thought that a car jack could hold the car in place after lifting it. You can get a unijack if you want the features of a car jack and a jack stand in one device.
- Block the Wheels
Before you jack up your car or truck, make sure that you block the wheels that are not being raised. If you are raising one of the front wheels, put a brick, rock, wood, or anything that can prevent the other wheels from rolling.
If you don’t block the wheels and they roll down, the car will drop down while you are tweaking something on the wheels. This will result in a disaster, which could have been easily prevented had you taken the necessary precautionary steps.
- Don’t Change Tires without Highway Patrol
This is the most important safety tip that you should always follow, especially if your tires burst in the middle of the road. A lot of accidents can happen if you stay on a freeway or highway while changing your tires. Hence, you should never do anything until a road service or the highway patrol arrives to assist you.
There are instances where you won’t be able to drive your car to safety, especially if your tires burst or were too damaged to keep your car running. The best thing that you can do is to use a white rag or a piece of paper and hang it on the driver’s side window and wait for help.
- Park on Level Ground
Before you jack up your vehicle, make sure that you are on even ground. If you are on a hill and you got a flat tire in the middle of the road, the best thing to do is to park close to the curb and turn your wheels toward the curb. Block the wheels that are facing the inclined part of the road to prevent the car from rolling down. You can use a piece of wood, metal, or brick to prevent your car from rolling.
- Make Sure You Know How to Use a Jack
One of the most common mistakes of drivers is that they try to use a jack without knowing how it is supposed to be used. If you don’t know that a jack should be placed on a jack point or you have no idea how to operate a jack, ask for help. It won’t be a good idea to use a jack if you don’t have any clue how it’s done.
Where do I put the jack under my car? You just need to look for the jack points and place the jack there. It is not too hard because they are usually found in the car’s manual. You can also look for them manually if you lost your car manual.
When using your jack, safety should always be your main priority, so make sure that you follow the simple guide that we provided above.