How to Put Up Your Car on Jack Stands Safely and Effectively
Jack stands are a vital tool for keeping your vehicle stable and propped up right after you’ve used a floor jack for lifting the vehicle. That is especially true if you know how to put a car on jack stands.
Once you’ve lifted the vehicle to your preferred level, you can fit these stands under the stable part of your car. Just like chassis, you can fit and test the jack stand to assess the sturdiness of your car. Finally, after your vehicle is steady, you can start off with your desired maintenance work on it.
Since many people have trouble getting their cars on a jack stand, we will provide a detailed, step-by-step guide that will help you with the job.
How to Put a Car on Jack Stands?
Step #1: Park the Car on a Solid Surface
The first step to getting your car on a jack stand is by parking it on a firm, solid surface. Your concrete garage floor or driveways can be great examples. It is important to use a firm surface as gravels or grass can never offer consistent support to your jack stands.
During hot weather, the weight along the bottom part of your metal jack can punch the divots in asphalt that’s warmed up by the scorching heat of the sun. So, it is always better to choose a concrete surface.
Once you’ve done this, put your car in first gear.
Step #2: Lift It Up
After you’re done placing the car on a firm surface, start lifting it with a floor jack. Make sure you choose the right jack which can carry the weight of your car. Here are some tips to follow while lifting your car:
- Choose the right jack that can flawlessly raise or lower the car
- Try using wheel chocks for the opposite set of wheels
- If you want to remove a certain wheel, immediately loosen the lug screws before lifting the car. Getting these screws loose after your car is lifted can adversely affect its stability.
- Get your jack under a center-front jacking point and lift it near the car. You can adjust the position and continue raising it until your car starts getting lifted. Carefully raise the vehicle.
- Do not lift your car by its bumpers, trim, or any other section that you’re not confident about. This will not just damage your car but can also lead to a fatal accident.
Step #3: Place the Stands
You’ll use two jack stands to either support the front or back of your car. Like we already mentioned, you need to provide symmetrical support. While placing the jack stands, try to keep your car as symmetrical as possible.
Now, place each jack stand under a proper jacking point at either section of your car right before the front wheel or rear wheel. Next, tweak the height of the stands, if necessary. Finally, check to ensure that the ratchet lever and the pin are in a proper position.
Step #4: Lower the Jack
For the fourth step, you’ll have to lower the jack until your car comfortably rests along with the stands. That said, if you get the sound of something shifting or giving way, stop at that very moment.
After that, lift your car and check if your jack stands are stable. Also, make sure that no part of your car is either bent or buckled up.
Step #5: Check for Stability
Before getting started with the repair, make sure that everything in your car is stable. This can be done by following the next couple of steps:
- Put your hands on your car’s bumper and give it a good wiggle. This will help you ascertain if everything is in the proper position.
- If you find anything to be unstable, lift the car with your jack and tweak the position of the stands.
Step #6: Offset the Impending Danger
Now that you’ve successfully put your car on the jack stands, you can safely work under the car. But even then, we’d suggest you follow these two additional steps if you suddenly find yourself in the middle of danger:
- Keep your floor jack elevated slightly below the point you had used for lifting the car. In that case, even if your car ends up falling, the floor jack will automatically catch it.
- You can also put any of the wheels you had initially removed along the lower edge of the car. This will help you manage the situation if the car suddenly falls. Although it might still injure you to an extent, the car won’t be able to crush or pin you since it’ll be caught by the wheel.
Finally, it is also important to inform a friend, family member, or anyone else that you’re working under the car. This will save you from potential emergencies.
Step #7: Get Your Car Safely on the Ground
When you’re finally done with the fixture, here are the steps you need to follow for getting your car on the ground:
- If you had kept a flat wheel right above the surface as an added safety measure, get your wheel in its original position.
- Now try to center the floor jack below the lifting point which you had used for lifting your car and raising it above your stand. Do not raise more than it is needed.
- Safely remove the jack stands and keep them by the side. Make sure you do not stumble on them.
- Lower the jack until your car is fully resting on the surface. At this point, your jack can be retracted and pulled out comfortably.
Remember, working with any vehicle involves a degree of risk. However, if you plan the right way, these steps can be easily mitigated.
To start off, make sure that you are completely sober before carrying out the operations. Also, since jack stands can fail despite your measures, it is important to follow our suggested how to put a car on jack stands tips.
Finally, work with someone at an earshot distance. In this way, even if you’re in the middle of an adverse situation, you’ll have someone to act immediately and contact the emergency services on your behalf.