How to Jack Up a Car From the Front: A Simple Guide

How to Jack Up a Car From the Front: A Simple Guide

Spread the love

Whether you’re looking to replace a flat tire or are planning to fill in new engine oil, jacking up your car is of utmost importance. There are also several other instances when you’d want to lift the car for accessing some parts on its undercarriage.

In any case, if you own a vehicle and need to operate it daily, knowing how to jack up a car from the front can save you from potential emergency issues. So, if you don’t yet know how to do such properly, we will be providing you some useful tips.

How to Jack Up a Car From the Front

A solid jack isn’t the only piece of equipment you’d need for jacking up your car from the front. As such, here is a detailed list of the other items you’d need for the process:

  • The instruction manual of your car which offers reference regarding the bolt or torque ratings, as well as the types of engine oil.
  • A good piece of a jack stand for extra stability
  • Multiple pieces of solid wood that can bear good weight. These will be used for protecting the underbody of your car.
  • Cinder blocks
  • Extra equipment for lighting to enhance visibility
  • A good pair of gloves for protecting your hands

What to Know Before You Jack Up the Car

While jacking up your car, you should understand that you are now dealing with a big piece of machinery which can injure you if it isn’t used the right way. Thus, it is important to go through our next set of tips and follow them properly to mitigate the risks of getting injured.

Additionally, you should also have a proper idea about the concept of jacking the car. In other words, you should pay ample attention to your vehicle while you’re suspending it. Finally, once you’ve considered every other precautionary measure, below are what you need to do to jack up a car from the front.


1. Get Your Car Parked on a Stable Ground

The first step to jacking your car is by raising it on the level ground. Since cars have a tendency of rolling, keeping it stationary is absolutely necessary. Ideally, you should keep your car on a concrete ground where there’s no possibility of incline or decline.

Once you’re done with that, straighten your steering wheel and start parking the car. You can also put it on neutral gear if you are using a car with a manual transmission.

You should also push the break as hard as you can. This will prevent the car from moving while you’re working under it. Once you follow this measure, you’d be completely safe while working with the car.

2. Find the Jack Points

Every car comes with a specific spot which serves as the meeting point of the jack plate and the vehicle. It is important to locate this spot in order to prevent any potential damage while you raise the car.

While every spot beneath your car isn’t load-bearing, but in almost every case, most jack points are located close to each other. You will find this information either on the instructional manual. Additionally, you can also search online for locating all the jack points.

3. Put the Floor Jack in the Right Spot

Now that you’ve found the jack points, it is time to put your floor jack in the right spot. At this point, you can place the pieces of wood on your jack plate.

This will wedge in the middle of the car’s jack and its jack point. At the end of the day, it will also reduce the risks of damaging your vehicle.

4. Raise Your Jack

While working with conventional floor jacks, it is important to ensure that the release valves are closed. This can be done when you rotate the primary lever in a clockwise direction.

For releasing the car, you’ll have to crank the primary lever in a counter-clockwise direction. Remember, the right-hand side should be tight, while the left-hand side should be loose. For scissor jacks, the cranking is usually done in a clockwise direction.

Here are some added tips to follow while raising the jack of your car.

  • If you’re looking to remove your wheels, make sure they are loosened up with a lug wrench before they’re finally off the ground.
  • Do not use your suspension components as a jack point. Since they do not have load-bearing properties, you can potentially damage them. While there are exceptions, this is definitely something you should ensure as a first-timer.

5. Raise the Car

As you start jacking the car to your preferred height, check the way your car shifts as you’re pumping the jack. Lift the car to your preferred height so that you’re left with ample space for working and getting your task done.

Once the vehicle is at your preferred height, check its stability. Also, if you have an extra pair of jack stands, position them along with the other jack points. Make sure it’s almost near the location where you’re currently working.

7. Get the Car Down

If you’re putting the car on jack stands, do not forget to remove them before you start lowering the car. If you had taken the wheel off, remember to put it on while also tightening the lug screws.

You can then fully fasten them with a good wrench once the wheels of your car are right on the ground. After that, follow the previous two steps in a reverse way.

Remember, opening the release valves on conventional jacks should be in a counterclockwise direction. The same would work for scissor jacks but while you do this, make sure you’re slow, careful, and extremely steady.

Finally, the car will be back on the ground and you can now remove the floor jack more conveniently. You’re now ready to hit the ground!

Bottom Line

Learning how to jack up a car from the front might be overwhelming and scary at first. However, once you follow the guidelines strictly, the process will be simpler than you’ve imagined. Nonetheless, always take precaution no matter how experienced you are.

Click Here to Leave a Comment Below

Leave a Reply: